Upload and Compare
Depending on the job configuration the following data will be saved during job execution:
Copy disaster recovery data | |||
---|---|---|---|
Contents | Memory | Comparison | Name |
Complete copy of the SRAM | SRAM | No | SRAM_BAK.001 |
PMC sequence program | FROM | Yes (SmartCompare) | PMCx, x=1,2,3,4,5,S |
PMC message file | FROM | Yes (binary) | MxPMCMSG, x=1,2,3,4,5 |
I/O configuration data | FROM | Yes (binary) | IOCONF |
C language executer application data | FROM | Yes (binary) | CEX_nnM |
C language executer user data | FROM | Yes (binary) | CEXnxxxx |
Macro executer application data | FROM | Yes (binary) | PDnnxxxx |
FANUC picture project (compiled) | FROM | Yes (binary) | FPF 2.0M or FPF0 |
NC programs in binary representation | FROM | Yes (binary) | ATA PROG |
Maintenance data (spare part number, software packages, that are installed on the CNC.) | FROM | Yes (binary) | MAINTINF |
Other files | FROM | Yes (binary) | |
Copy PMC data | |||
PMC parameters | SRAM | Yes (ASCII) | PMCx_PRM.TXT, x=1,2,3,4,5,S |
PMC sequence program | FROM | Yes (SmartCompare) | PMCx, x=1,2,3,4,5,S |
PMC message file | FROM | Yes (binary) | MxPMCMSG, x=1,2,3,4,5 |
I/O configuration data | FROM | Yes (binary) | IOCONF |
Copy CNC data | |||
NC programs | SRAM | Yes (ASCII) | \PROGRAM_MEMORY\CNC_MEM\MTB1\ABC |
Tool offset data | SRAM | No | TOOLOFST.TXT |
CNC parameters | SRAM | Yes (ASCII) | CNC-PARA.TXT |
Pitch error compensation data | SRAM | No | PITCH.TXT |
Custom macro variables | SRAM | Yes (ASCII) | MACRO.TXT |
Work zero offset data | SRAM | Yes (ASCII) | EXT_WKZ.TXT |
Operation history data | SRAM | No | OPRT_HIS.TXT |
Rotary table dynamic fixture offset | SRAM | Yes (ASCII) | FIXTURE.TXT |
Copy all user data from the FROM | |||
Other files Also contains SRAM backups (automatic data backup) |
FROM | Yes (binary) |
Please note:
- For some of the supported devices not all these data are available and retrievable. Due to the machine configuration, non-retrievable files can only be backed up manually.
- If a PMC program was changed on the controller without a backup being stored in the FROM, a warning will be shown during upload.
- During comparison the path configured in the LAD/PMC files (PMCx, x=1,2,3,4,5,S) will be used as the pathway to the file instead of the file name.
- During a version comparison only LAD files are compared.